Sistem Monitoring Keadaan Air Berbasis Iot (water State Monitoring System Using Iot)
Abstract
ABSTRAK
Air menjadi sumber kehidupan baik bagi manusia, hewan, dan tumbuhan. Kurangnya
edukasi terhadap lingkungan membuat masyarakat seringkali membuang sampah ke sungai, laut,
maupun selokan. Hal itu membuat ekosistem pada lingkungan tersebut menjadi tercemar. Penulis
merancang sebuah alat untuk memonitoring keadaan air dengan memvisualisasikan hasilnya pada
internet. Perancangan alat ini terdiri dari sensor pH, sensor kekeruhan, dan sensor konduktivitas.
Arduino Uno dan NodeMCU digunakan sebagai mikrokontroler pada penelitian ini. Dari hasil
pengujian monitoring air secara otomatis, didapatkan rata–rata tingkat akurasi saat pengujian
sebesar 97,676% pada sensor pH, untuk sensor konduktivitas sebesar 91,186%, dan sensor
kekeruhan sebesar 81,7%.
Kata Kunci : Konduktivitas, pH, Turbidity, Monitoring, IoT, Air Bersih
ABSTRACT
Water is a source of life for both humans, animals and plants. Lack of education on the
environment has made people often throw garbage into rivers, oceans and ditches. This makes the
ecosystem in the environment polluted. The author designed a tool for monitoring water conditions
by visualizing the results on the internet. The design of this tool consists of a pH sensor, a turbidity
sensor and a conductivity sensor. Arduino Uno and NodeMCU were used as microcontrollers in
this study. From the results of automatic water monitoring testing, the average level of accuracy
when testing was 97.676% for the pH sensor, for the conductivity sensor was 91.186%, and the
turbidity sensor was 81.7%.
Keywords: Conductivity, pH, Turbidity, Monitoring, IoT, Clean Water
Air menjadi sumber kehidupan baik bagi manusia, hewan, dan tumbuhan. Kurangnya
edukasi terhadap lingkungan membuat masyarakat seringkali membuang sampah ke sungai, laut,
maupun selokan. Hal itu membuat ekosistem pada lingkungan tersebut menjadi tercemar. Penulis
merancang sebuah alat untuk memonitoring keadaan air dengan memvisualisasikan hasilnya pada
internet. Perancangan alat ini terdiri dari sensor pH, sensor kekeruhan, dan sensor konduktivitas.
Arduino Uno dan NodeMCU digunakan sebagai mikrokontroler pada penelitian ini. Dari hasil
pengujian monitoring air secara otomatis, didapatkan rata–rata tingkat akurasi saat pengujian
sebesar 97,676% pada sensor pH, untuk sensor konduktivitas sebesar 91,186%, dan sensor
kekeruhan sebesar 81,7%.
Kata Kunci : Konduktivitas, pH, Turbidity, Monitoring, IoT, Air Bersih
ABSTRACT
Water is a source of life for both humans, animals and plants. Lack of education on the
environment has made people often throw garbage into rivers, oceans and ditches. This makes the
ecosystem in the environment polluted. The author designed a tool for monitoring water conditions
by visualizing the results on the internet. The design of this tool consists of a pH sensor, a turbidity
sensor and a conductivity sensor. Arduino Uno and NodeMCU were used as microcontrollers in
this study. From the results of automatic water monitoring testing, the average level of accuracy
when testing was 97.676% for the pH sensor, for the conductivity sensor was 91.186%, and the
turbidity sensor was 81.7%.
Keywords: Conductivity, pH, Turbidity, Monitoring, IoT, Clean Water
Full Text:
PDFRefbacks
- There are currently no refbacks.