Implementasi Dan Perancangan Pengatur Suhu Dan Ph Air Otomatis Aquascape Berbasis Iot
DOI:
https://doi.org/10.34818/eoe.v9i2.17668Abstract
Abstract: Aquascapes or artificial ecosystems in aquariums have a high level of sensitivity in terms of maintenance, many factors need to be considered, including water temperature and the level of stability (pH) in the water. The design of this automation system to regulate water temperature and monitoring the pH of the water in the aquascape is based on the problems faced by Aquascape owners who have to pay attention to the level of temperature stability every time, and pH for the survival of the plant ecosystem in the aquascape. The water temperature in the aquascape is very influential for the survival of aquatic plants. Water temperature can be measured using a thermometer. Aquascape water temperature will be ideal if the water temperature is 25 – 28 degrees Celsius. And the ideal pH for an aquascape is 6 to 8. More than or less than that pH, the water conditions in the aquascape are unstable and can cause plants to become unhealthy and cannot grow optimally. From the results of the tests that have been carried out, it is known that the system can work well. Testing QoS (Quality of Service) for sending device data to telegram the delay value obtained is 2282s. In QoS testing for reading data from device to device to telegram. the average throughput obtained is 414.69 bps. Keywords: Aquascape, aquascape water temperature, sensorReferences
[1] R. Firmansyah, Pengaruh Suhu Terhadap Pertumbuhan Tanaman, Jakarta: Pusat Perbukuan,DepartemenPendidikan Nasional, 2009.
[2] T. Widjadja, Pesona Taman dalam Akuarium, Jakarta Selatan: PT Argo Media, 2013, p. p.101.
[3] R. Wulandari, Analisis Qos (Quality Of Service) Pada Jaringan Internet (Studi Kasus : Upt Loka Uji Teknik Penambangan Jampang Kulon – Lipi), Vol. Vol. 2, J. T. I. D. S. Inf., Penyunt., Doi: 10.28932/Jutisi.V2i2.454., 2016, P. Pp. 162–172.
[4] I. F. a. S. B. U. Y. A. Pranata, Analisis Optimasi Kinerja Quality of Service Pada Layanan Komunikasi Data Menggunakan Ns-2 Di Pt. Pln (Persero) Jember, vol. vol. 20, Sinergi, Penyunt., doi: 10.22441/sinergi.2016.2.009., 2016, p. p. 149.
[5] D. J. T. a. C. J. B. Scharmer, Reliability , Availability , and Maintainability Considerations in the Design and Evaluation of Physical Security Systems, 2012, p. pp. 1–12.
[6] C. Alaoui, Peltier thermoelectric modules modeling and evaluation., International Journal of Engineering (IJE) 5.1, 2011, p. 111.
[7] S. I. Rahmat, Sistem peringatan dini banjir menggunakan sensor ultrasonik berbasis Arduino Uno., Jurnal Manajemen dan Teknik Informatika (JUMANTAKA) 3.1, 2019.
[8] D. Aztisyah, Pengendalian Suhu dan PH Air Pada Aquascape Ikan Guppy Menggunakan Fuzzy., INISTA: Journal of Informatics, Information System, Software Engineering and Applications 4.1, 2021.
[9] Y. a. J. S. Triawan, Perancangan Sistem Otomatisasi Pada Aquascape Berbasis Mikrokontroller Arduino Nano., JTEIN: Jurnal Teknik Elektro Indonesia 1.2, 2020, pp. 76-83.
[10] M. Pratiwi, Pengembangan Tutorial Pembuatan Media Aquascape Berbasis Project Based Learning (PjBL) Pada Materi Ekosistem Siswa Kelas X SMA. Diss., UIN Raden Intan Lampung, 2017.
[11] D. A. Kusumawati, Simulator Uji Sistem Pengukuran Seismic Cone Penetration (Scpt) Menggunakan Sensor Piezoelectric Untuk Mengetahui Perbandingan Nilai Frekuensi Menggunakan Bola Baja Pada Media Uji Besi. Diss., Universitas Gadjah Mada, 2020.
[12] M. W. a. G. W. Kasrani, Perancangan Prototype Pengendali Relay Berbasis Web dengan Ardino Uno dan Ethernet Shield., 2016.
[13] M. a. D. E. M. Aditya, "Sistem Sterilisator Otomatis Berbasis Arduino Uno.", JTEIN: Jurnal Teknik Elektro Indonesia 1.2, 2020, pp. 99-109.
[14] F. R. Nurlianisa, "Kit Aquascape Berbasis Internet of Things Melalui Aplikasi Blynk dengan Arduino Uno Untuk Pemeliharaan Lilaeopsis Brasiliensis.", 2018.
[15] H. Fatari, Sistem Pemantauan Kejernihan Dan Kekeruhanair Dalam Akuarium Menggunakan Sms Berbasis Mikrokontroler Avr Atmega 16. Diss., Politeknik Negeri Sriwijaya, 2016.
[16] M. V. Tarihoran, "Mesin Etching Pcb (Printed Circuit Board) Menggunakan Arduino Nano.", Vol. Vol .1, Seminar Nasional Ilmu Terapan (Sniter)., 2019.
[17] A. S. Thoha, "Monitoring Dan Kontrol Suhu Aquascape Menggunakan Arduino Dengan Sensor Suhu Ds18b20.", Jurnal Ilmiah Mahasiswa Kendali Dan Listrik 2.2, 2021, Pp. 75-83.
