Perancangan Dan Realisasi Slot Ring Patch Wearable Antenna Dengan SRR Metamaterial Untuk Mengurangi Specific Absorption Rate (SAR)
DOI:
https://doi.org/10.34818/eoe.v9i6.19064Abstract
Abstrak— Keamanan antara pasien dan tenaga kesehatan menjadi perhatian terlebih saat pandemi Covid-19. Banyak tenaga kesehatan yang terpapar saat berinteraksi dengan pasien walaupun dengan protokol yang ketat. Cara untuk mengurangi interaksi pasien dengan tenaga kesehatan adalah membuat sebuah perangkat yang dapat memonitor pasien secara jarak jauh yang berfungsi mengirimkan informasi dari pasien menuju ke pusat rumah sakit sehingga nantinya bisa diakses oleh tenaga kesehatan, salah satu komponen dari perangkat tersebut adalah antena. Agar antena tersebut nyaman dengan membuat antena tersebut fleksibel, selanjutnya disebut sebagai wearable antenna. Namun antena tersebut tak luput dari kekurangan, yaitu efek radiasi yang dihantarkan oleh antenanya. Cara untuk menguranginya dengan menambah metamaterial di belakang antena. Percobaan dilakukan dua kali, kondisi on-body dan offbody. Pada percobaan off-body, antena konvensional mendapatkan nilai gain 6,203 dBi dan bandwidth 147,4 MHz sedangkan antena dengan metamaterial mendapatkan hasil gain 6,455 dBi dan bandwidth 163,6 MHz. Percobaan on-body jarak 0 mm, antena konvensional mendapatkan nilai SAR sebesar 1,39712 W/Kg dengan bandwidth sebesar 146,8 MHz sedangkan dengan penambahan komponen metamaterial mendapatkan nilai SAR sebesar 1,17096 W/Kg dengan bandwidth sebesar 151,7 MHz. Kata kunci Wearable antenna, microstrip, SAR, ISM, Metamaterial, off-body, on-body.Downloads
References
[1] C95.3-2021 - IEEE Recommended Practice for
Measurements and Computations of Electric,
Magnetic, and Electromagnetic Fields with Respect
to Human Exposure to Such Fields, 0 Hz to 300 GHz.
IEEE, 2021.
[2] DYAH ALMIRA, “ANTENA WEARABLE
PATCH SIRKULAR UNTUK MONITORING
KESEHATAN,” Telkom University, Jan. 2021.
[3] S. Karthikeyan, Y. Venu Gopal, V. Giri Narendra
Kumar, and T. Ravi, “Design and Analysis of
Wearable Antenna for Wireless Body Area
Network,” in IOP Conference Series: Materials
Science and Engineering, Oct. 2019, vol. 590, no. 1.
doi: 10.1088/1757-899X/590/1/012022.
[4] M. R. I. Faruque, M. T. Islam, and M. A. M. Ali, “A
new design of metamaterials for SAR reduction,”
Measurement Science Review, vol. 13, no. 2, pp. 70–
74, Apr. 2013, doi: 10.2478/msr-2013-0011.
[5] G. P. Gao, B. Hu, S. F. Wang, and C. Yang,
“Wearable Circular Ring Slot Antenna with EBG
Structure for Wireless Body Area Network,” IEEE
Antennas Wirel Propag Lett, vol. 17, no. 3, pp. 434–
437, Mar. 2018, doi: 10.1109/LAWP.2018.2794061.
[6] M. Wang et al., “Investigation of SAR Reduction
Using Flexible Antenna With Metamaterial Structure
in Wireless Body Area Network,” IEEE Trans
Antennas Propag, vol. 66, no. 6, pp. 3076–3086, Jun.
2018, doi: 10.1109/TAP.2018.2820733.
[7] J. Mohan, A. Gupta, Jaypee Institute of Information
Technology University, Institute of Electrical and
Electronics Engineers. Uttar Pradesh Section. SP/CS
Joint Chapter, and Institute of Electrical and
Electronics Engineers, “SIW Based Two Layer Slot
Ring Antenna for XBand RADAR Applications,”
IEEE, 2019.
[8] C. A. Balanis, Antenna Theory Analysis and Design ,
Fourth Edition. Hoboken, New Jersey: John Wiley &
Sons, Inc., 2016.
[9] R. A. Kachiramattom, “Electromagnetic modelling
of human tissues and its application on the interaction
between antenna and human body in the BAN
context,” Paris , Jul. 2009. [Online]. Available:
https://www.researchgate.net/publication/45110707
[10] C. Gabriel, “COMPILATION OF THE
DIELECTRIC PROPERTIES OF BODY TISSUES
AT RF AND MICROWAVE FREQUENCIES,”
KING’S COLL LONDON (UNITED KINGDOM)
DEPT OF PHYSICS, 1996.
[11] ITU Radio Regulations, “CHAPTER II –
Frequencies, ARTICLE 5 Frequency allocations,
Section IV – Table of Frequency Allocations,” 2018
[12] G. Singh, R. ni, and A. Marwaha, “A Review of
Metamaterials and its Applications,” International
Journal of Engineering Trends and Technology, vol.
19, no. 6, pp. 305–310, Jan. 2015, doi:
10.14445/22315381/IJETT-V19P254.
[13] A. Kabiri and O. M. Ramahi, “Generic Building
Blocks for Construction of Artificial Magnetic
Media,” Progress In Electromagnetics Research B,
vol. 62, pp. 17–28, 2015.
[14] S. Roychoudhury, V. Rawat, A. H. Jalal, S. N. Kale,
and S. Bhansali, “Recent advances in metamaterial
split-ring-resonator circuits as biosensors and
therapeutic agents,” 2019. [Online]. Available:
https://www.sciencedirect.com/science/article/pii/S0
956566316306492
[15] A. M. Hediya, A. M. Attiya, and W. S. El-Deeb,
“Reduction of Specific Absorption Rate: A Review
Article,” The Egyptian International Journal of
Engineering Sciences and Technology, vol. 39, pp.
80–96, 2022, [Online]. Available:
https://eijest.journals.ekb.eg/
[16] A. Jafargholi, A. Jafargholi, J. H. Choi, M. Veysi, and
A. Soleimani, “Microstrip patch back radiation
reduction using metamaterial superstrate,” IET
Microwaves, Antennas and Propagation, vol. 14, no.
2, pp. 158–164, Feb. 2020, doi: 10.1049/ietmap.2018.6237.
[17] F. Bilotti and C. Vegni, “Employment of artificial
magnetic metamaterials to effectively reduce the
back-lobe of patch antennas,” Electromagnetics, vol.
28, no. 7, pp. 513–522, Oct. 2008, doi:
10.1080/02726340802322544.
[18] X. J. Gao, T. Cai, and L. Zhu, “Enhancement of gain
and directivity for microstrip antenna using negative
permeability metamaterial,” AEU - International
Journal of Electronics and Communications, vol. 70,
no. 7, pp. 880–885, Jul. 2016, doi:
10.1016/j.aeue.2016.03.019.
[19] M. Abu, M. Muhamad, Z. Zakaria, and H. Hasan,
“Millimeter-Wave Parasitic AMC Patches on the
Array Antenna,” in Proceedings - 6th International
Conference on Computer and Communication
Engineering: Innovative Technologies to Serve
Humanity, ICCCE 2016, Dec. 2016, pp. 19–24. doi:
10.1109/ICCCE.2016.18.
[20] A. P. Feresidis, G. Goussetis, S. Wang, and J. C.
Vardaxoglou, “Artificial magnetic conductor
surfaces and their application to low-profile highgain planar antennas,” IEEE Trans Antennas Propag,
vol. 53, no. 1 I, pp. 209–215, Jan. 2005, doi:
10.1109/TAP.2004.840528.
[21] R. Salvado, C. Loss, Gon, and P. Pinho, “Textile
materials for the design of wearable antennas: A
survey,” Sensors (Switzerland), vol. 12, no. 11. pp.
15841–15857, Nov. 2012. doi: 10.3390/s121115841.



