Design of Organic and Non-Organic Waste Detection Device
Abstrak
In this study the author will focus on making a device that can perform waste sorting automatically, for sorting organic and non-organic waste types which aim to assist the waste sorting process which is expected to facilitate the recycling process. The results of testing the device that has been designed by the author, the device can sort waste automatically with the help of ultrasonic sensors and proximity sensors. The proximity sensor used is inductive and capacitive proximity sensor. Inductive proximity sensors are used to detect ferrous type waste, capacitive proximity sensors are used to detect non-ferrous type waste. The device that has been made has limitations, that is the incoming waste must be dry so it does not interfere with sensor readings, and also the dimensions of the waste must be of a certain size to fit inside the garbage can.
Keywords: Waste detecting device, Proximity sensors, Sorting waste, Garbage can.
Referensi
Puadi, O., & Hambali, H. (2022). Perancangan Alat
Pemilah Sampah Otomatis. JTEIN: Jurnal Teknik
Elektro Indonesia, 3(1), 1-14.
Akbar, M., Anjasmara, S. D., & Wardhani, K. D. K.
(2021). Design and Build an Organic and Inorganic
Waste Detector Using Proximity Sensors and
NodeMCU ESP8266. Jurnal Komputer Terapan ,
(2), 290-299.
Ichsan, Temmy Julianul, Tedi Gunawan, and Rini
Handayani. "Prototipe Pemilah Sampah Organik Dan
Non-organik." eProceedings of Applied Science 5.3
(2019).
Wahyuni, Sari. "Design and Build A Portable Smart
Trash With Metal & Non Metal Separator."
Engineering and Technology International Journal
02 (2022): 116-120.
Ahmada, Irfana Kabir, SN Hidayah Haruna, and Mohd
Reza Azmia. "An Application of Capacitance Proximity
Sensor for Identification of Recyclable Materials." Jurnal
Kejuruteraan SI 1.5 (2018): 37-41.
Akbar, M., Anjasmara, S. D., & Wardhani, K. D. K.
(2021). Design and Build an Organic and Inorganic
Waste Detector Using Proximity Sensors and
NodeMCU ESP8266. Jurnal Komputer Terapan,
(2), 472607.
Rahayu, Maya, Muhammad Nurkholis Widlan, and
Hutama Arif Bramantyo. "Smart Trash with Web
Integrated Volume Monitoring and Sorting System
via MQTT Protocol." E-JOINT (Electronica and
Electrical Journal Of Innovation Technology) 3.1
(2022): 6-11.
Saputra, Hendri Maja, Totok Agung Pambudi, and
Dalmasius Ganjar Subagjo. "Rancang Bangun
Umpan Balik Eksternal untuk Kendali Sudut Motor
Servo Berbasis Arduino." Jurnal Teknologi Bahan
dan Barang Teknik 6.2 (2016): 43-48.
Al Afgani, Muhammad Ilham, and Dyah Riandadari.
"Rancang Bangun Trainer Trafo Step Up dan Step
Down Dalam Satu Sistem." Jurnal Rekayasa Mesin
1 (2018).