Pengaruh Bahan Tambahan Terhadap Kalor Briket Dari Sampah

Authors

  • Raysa Nurpujawati Gunawan Telkom University
  • Suwandi Suwandi Telkom University
  • Ahmad Qurthobi Telkom University

Abstract

Abstrak
Secara umum sampah menjadi sumber masalah utama pencemaran lingkungan oleh karena itu salah satu pemanfaatan sampah bisa dijadikan bahan bakar alternative. Sampah yang akan dijadikan bahan bakar alternative terlebih dahulu dihitung nilai kalornya. Nilai kalor sampah menjadi parameter penting karena dengan mengetahui nilai kalor setiap komponen sampah akan memudahkan untuk mendapatkan bahan bakar alternative yang lebih efisien. Nilai kalor yang dibutuhkan untuk proses pembakaran sampah minimal sekitar 1500 kcal/kg, sedangkan nilai kalor sampah di indonesia hanya mencapai 1000 kcal/kg. Selain sampah ada beberapa yang bisa dijadikan bahan campuran agar menghasilkan nilai kalor yang tinggi antara lain penambahan bahan additive seperti batu bara, sekam padi, serbuk gergaji, king grass. Metode yang dilakukan dengan mengukur nilai kalor sampah dengan alat kalorimeter bom. Untuk nilai kalor sampah rata-rata sekitar 4668 cal/g, nilai kalor batu bara sekitar 5708 cal/g, nilai kalor serbuk gergaji sekitar 4408 cal/g, nilai kalor sekam padi sekitar 4424 cal/g, dan nilai kalor king grass sekitar 4997 cal/g.

Kata Kunci: Energi Alternative, Kalor Sampah, Uji Kalorimater Bom, Waste to Energy
Abstract
In general, waste becomes the main source of environmental pollution, therefore one of the utilization of waste can be used as alternative fuel. The waste that will be used as alternative fuel is calculated calorific value first. The value of waste heat becomes an important parameter because by knowing the calorific value of each waste component will make it easier to get a more efficient alternative fuel. The calorific value required for the waste combustion process is at least about 1500 kcal / kg, while the calorific value of waste in Indonesia only reaches 1000 kcal / kg. In addition to waste there are some that can be used as a mixture of materials to produce high calorific value such as the addition of additive materials such as coal, rice husks, sawdust, king grass. The method performed by measuring the value of waste heat with bomb calorimeter tool. For average waste heat calorific value of about 4668 cal / g, coal calorific value is about 5708 cal / g, sawdust heat value about 4408 cal / g, rice calorific value of rice about 4424 cal / g, and king grass calorific value about 4997 cal / g.

Keywords: Alumina, nanoparticles, viscosity, thermal conductivity, concentration, and coefficient of performance

Downloads

Published

2018-12-01

Issue

Section

Program Studi S1 Teknik Fisika