Optimalisasi Rak Penyimpanan Pada Gudang Work-in-process Untuk Mengatasi Kekurangan Kapasitas Rak Dan Penumpukkan Pallet Dengan Menggunakan Standardisasi Kerja
DOI:
https://doi.org/10.34818/eoe.v7i2.12434Abstract
Abstrak PT XYZ Farma merupakan perusahaan yang bergerak di bidang farmasi dengan salah satu produksinya yaitu produk LVP. Dalam rangkaian proses produksi produk LVP perlu dilakukan proses penyimpanan WIP selama 14 hari sebagai salah satu syarat untuk memastikan kualitas produk yang sampai pada konsumen adalah kualitas yang baik. Pada proses penyimpanan yang dilakukan di Gudang WIP teridentifikasi bahwa terdapat penyimpanan yang tidak sesuai karena adanya kekurangan rak untuk penyimpanan pallet WIP sebanyak 54 pallet. Berdasarkan permasalahan tersebut, dilakukan penelian yang bertujuan untuk mengoptimalkan alokasi rak penyimpanan pada GWIP. Dengan menggunakan konsep lean manufacturing, identifikasi penyebab masalah dilakukan pada GWIP dengan menggunakan tools berupa VSM, PAM, dan 5Whys. Berdasarkan permasalahan yang teridentifikasi, yaitu terjadinya alokasi rak penyimpanan menjadi rak staging karena adanya proses staging, selanjutnya dilakukan perancangan standardisasi kerja pada GWIP dengan perhitungan waktu baku dan penyederhanaan kerja berupa perancangan aplikasi. Hasil dari usulan yang diberikan yaitu dengan adanya perancangan aplikasi dan perhitungan waktu baku, maka proses staging dapat dihilangkan dan 54 rak kembali fungsinya menjadi rak penyimpanan, sehingga tidak terjadi lagi penyimpanan pallet di luar rak penyimpanan. Hasil dari usulan ini digambarkan dalam simulasi dengan menggunakan software FlexSim. Berdasarkan simulasi yang dilakukan, didapat bahwa tidak terjadi tumpukan pada GWIP setelah perbaikan. Kata kunci : gudang, lean manufacturing, standardisasi kerja, FlexSim Abstract PT XYZ Farma is a pharmacy company with one of its product namely LVP products. In the series of LVP production processes, it is necessary to carry out a 14-day WIP storage process as one of the requirements to ensure that consumers can get the best quality of the product. In the storage process carried out at WIP Warehouse, it was identified that there was inappropriate storage due to lack of shelves for WIP pallet storage. Based on these problems, a study was conducted aimed at optimizing the allocation of storage shelves in GWIP. By using the concept of lean manufacturing, identification of the causes of the problem is done at GWIP by using tools such as VSM, PAM, and 5Whys. Based on the identified problems, namely the allocation of storage shelves into staging racks due to the staging process, then the work standardization design is carried out on GWIP by calculating standard time and simplifying the work in the form of application design. The result of the proposal given is that with the application design and standard time calculation, the staging process can be removed and the 54 returns to its normal functioning as a storage rack, so that pallet storage does not occur outside the storage rack again. The results of this proposal are illustrated in a simulation using FlexSim software. Based on the simulation conducted, it was found that there was no pile in the GWIP after improvement. Keywords: warehouse, lean manufacturing, work standardization, FlexSim
Downloads
References
[1] R. S. Mor, A. Bhardwaj, S. Singh and A. Sachdeva, "Productivity Gains Through Standardization-of-work in A Manufacturing Company," Journal of Manufacturing Technology Management, 2018.
[2] S. Wignjosoebroto, Ergonomi, Studi Gerak dan Waktu, Jakarta: Guna Widya, 2008.
[3] I. Z. Sutalaksana, R. Anggawisastra and J. H. Tjakraatmadja, Teknik Perancangan Sistem Kerja, Bandung: Institut Teknologi Bandung, 1979.
[4] I. Mahendra and D. T. E. Yanto, "Agile Development Methods dalam Pengembangan Sistem Informasi Pengajuan Kredit Berbasis Web (Studi Kasus : Bank BRI Unit Kolonel Sugiono)," Jurnal Teknologi dan Open Source, pp. 13-24, 2018.
[5] A. Z. Abideen and F. B. Mohamad, "Supply chain lead time reduction in a pharmaceutical production warehouse – a case study," International Journal of Pharmaceutical and Healthcare Marketing, 2019.
[6] I. Abushaika, L. Salhieh and N. Towers, "Improving distribution and business performance through lean warehousing," International Journal of Retail & Distribution Management, pp. 780-800, 2018.
[7] M. Arif, Bahan Ajar Rancangan Teknik Industri, Yogyakarta: Deepublish, 2016.
[8] D. Battini, M. Calzavara, A. Persona and F. Sgarbossa, "A comparative analysis of different paperless picking systems," Industrial Management & Data Systems, pp. 483-503, 2015.
[9] R. L.-D. T. a. R. K. De Koster, "Design and control of warehouse order picking: a literature review," European Journal of Operational Research, pp. 481-501, 2007.
[10] E. G. C. J. M. a. N. W. Grosse, "Incorporating human factors in order picking planning models: framework and research opportunities," International Journal of Production Research, pp. 695-717, 2015.
[11] P. Hines and N. Rich, "The Seven Value Stream Mapping Tools," International Journal of Operations & Production Management, pp. 46-64, 1997.
[12] H. Hirano, JIT Implementation Manual, Taylor & Francis Group, 2009.
[13] P. C. Marifa, F. Y. Andriani, S. Indrawati, A. N. Parmasari, H. Budiman and A. Kamilia, "Production Waste Analysis Using Value Stream Mapping and Waste Assessment Model in a Handwritten Batik Industry," MATEC Web Conferences, 2018.
[14] Y. Monden, Toyota Production System : An Integrated Approach to Just-In-Time, Taylor & Francis Group, 2012.
[15] T. Ohno, Toyota Production System: Beyond Large-Scale Production, Cambridge: Productivity Press, 1988.
[16] M. Rother and J. Shook, Learning to See: Value Stream Mapping to Add Value and Eliminate Muda, Brookline: The Lean Enterprise Institute, 1999.
[17] S. M. Zahraee, A. Hashemi, A. A. Abdi, A. S. and J. M. Rohani, "Lean Manufacturing Implementation Through Value Stream Mapping: A Case Study," Jurnal Teknologi, pp. 119-124, 2014.
[18] D. Tapping, Value Stream Mapping for the Lean Office, New York: Productivity Press, 2003.
[19] O. Serrat, "The Five Whys Technique," International Publication, 2009.
[20] L. Wilson, How to Implement Lean Manufacturing, New York: The McGraw-Hill Companies, Inc, 2010.



