Optimasi Pada Struktur Thin-walled Bionic- Bamboo Dengan Metode Taguchi Untuk Meningkatkan Crashworthiness

Authors

  • Bagas Arganto P Telkomuniversity
  • Rino Andias Anugrah Telkomuniversity
  • Teddy Sjafrizal Telkomuniversity

DOI:

https://doi.org/10.34818/eoe.v7i2.12437

Abstract

Abstrak Bio-Inspired telah menjadi perhatian beberapa tahun terakhir karena memiliki struktur yang baik dan memiliki fitur mekanik yang unik. Desain tabung Thin-Walled yang menerapkan struktur Bio-Inspired Rib pada bambu dengan konfigurasi multi-cell, dengan tujuan menambah specific energy absorption (SEA). Rib pada Bambu memiliki kekuatan yang baik karena mampu menahan beban lingkungan seperti angin dan hujan. Inspirasi pada desain rib bambu akan dioptimasi pada struktur Thin-Walled dengan konfigurasi 4 cross-sectional rib dengan desain (I-Shape),(V-Shape),(O-Shape) dan (X-Shape). Efek dari cross-sectional rib akan dievaluasi meggunakan metode finite element. Untuk menghasilkan nilai specific energy absorption (SEA) optimal dibutuhkan desain faktor input yang sesuai. Metode Taguchi akan digunakan untuk menentukan desain faktor yang cocok untuk pengujian ini, terdapat 2 desain faktor yaitu desain rib dan ketebalan dengan masing masing faktor memiliki 4 jumlah level, maka dengan hal ini dilakukan eksperimen sebanyak 16 kali, hal ini berdasarkan L16 (42) full factorial pada orthogonal array. Untuk hasil pengolahan data yang telah dilakukan desain faktor optimal pada faktor desain adalah pada Level 4 dengan bentuk rib X- dan Shape pada faktor ketebalan 1.8mm yang menghasilkan nilai specific energy absorption (SEA) 67.022 J/g. Kata kunci: Thin-Walled, metode taguchi, finite element, Bionic-Bamboo, Bio-Inspired Abstract Bio-Inspired has been a concern in recent years because it has a good structure and has unique mechanical features. Thin-walled tube design that applies the Bio-Inspired Rib structure to bamboo in a multi-cell configuration, with the aim of increasing specific energy absorption (SEA). Rib on Bamboo has good strength because it is able to withstand environmental loads such as wind and rain. Inspiration on bamboo rib design will be optimization in Thin-Walled structures with 4 cross-sectional rib configurations with designs (I-Shape), (VShape), (O-Shape) and (X-Shape). The effects of cross-sectional rib will be evaluated using the finite element method. To produce the optimal specific energy absorption (SEA) value, an appropriate input factor design is needed. The Taguchi method will be used to determine the design factors that are suitable for this test, there are 2 design factors, namely the rib design and thickness with each factor having 4 number of levels, then with this experiment carried out 16 times, this is based on L16 (42) full factorial on orthogonal arrays. For the results of data processing that has been done the optimal factor design on the design factor is at Level 4 with the rib X-Shape shape and at a thickness factor of 1.8mm which results in a specific energy absorption (SEA) value of 67,022 J / g. Keywords: Thin-Walled, Taguchi Method, finite element, Bionic-Bamboo, Bio-Inspired

Downloads

Download data is not yet available.

References

[1] Verma D, Senal I. Natural fiber-reinforced polymer composites [Internet]. Biomass, Biopolymer-Based Materials, and Bioenergy: Construction, Biomedical, and other Industrial Applications. Elsevier Ltd; 2019. 103–122 p. Available from: http://dx.doi.org/10.1016/B978-0-08-102426-3.00006-0

[2] Hu D, Wang Y, Song B, Dang L, Zhang Z. Energy-absorption characteristics of a bionic honeycomb tubular nested structure inspired by bamboo under axial crushing. Compos Part B Eng [Internet]. 2019;162(October 2018):21–32. Available from: https://doi.org/10.1016/j.compositesb.2018.10.095

[3] Abramowicz W, Jones N. Dynamic progressive buckling of circular and square tubes. Int J Impact Eng. 1986;4(4):243–70.

[4] Nia AA, Hamedani JH. Comparative analysis of energy absorption and deformations of thin walled tubes with various section geometries. Thin-Walled Struct [Internet]. 2010;48(12):946–54. Available from: http://dx.doi.org/10.1016/j.tws.2010.07.003

[5] Zhang X, Zhang H. Thin-Walled Structures Energy absorption of multi-cell stub columns under axial compression. Thin Walled Struct [Internet]. 2013;68:156–63. Available from: http://dx.doi.org/10.1016/j.tws.2013.03.014

[6] M. Versos CA, A. D. Biologically Inspired Design: Methods and Validation. Ind Des - New Front. 2011;(May).

[7] Chen BC, Zou M, Liu GM, Song JF, Wang HX. Experimental study on energy absorption of bionic tubes inspired by bamboo structures under axial crushing. Int J Impact Eng [Internet]. 2018;115(January):48–57. Available from: https://doi.org/10.1016/j.ijimpeng.2018.01.005

[8] Wu S, Zheng G, Sun G, Liu Q, Li G, Li Q. International Journal of Impact Engineering On design of multicell thin-wall structures for crashworthiness. Int J Impact Eng [Internet]. 2016;88:102–17. Available from: http://dx.doi.org/10.1016/j.ijimpeng.2015.09.003

[9] Estrada Q, Szwedowicz D, Rodriguez-Mendez A, Gómez-Vargas OA, Elias-Espinosa M, Silva-Aceves J. Energy absorption performance of concentric and multi-cell profiles involving damage evolution criteria. Thin-Walled Struct [Internet]. 2018;124(June 2017):218–34. Available from: https://doi.org/10.1016/j.tws.2017.12.013

[10] Marsolek J, Reimerdes HG. Energy absorption of metallic cylindrical shells with induced non-axisymmetric folding patterns. Int J Impact Eng. 2004;30(8–9):1209–23.

Downloads

Published

2020-08-01

Issue

Pages

5414-5422

Section

Program Studi S1 Teknik Industri

How to Cite

P, B. A., Anugrah, R. A., & Sjafrizal, T. (2020). Optimasi Pada Struktur Thin-walled Bionic- Bamboo Dengan Metode Taguchi Untuk Meningkatkan Crashworthiness. EProceedings of Engineering, 7(2), 5414-5422. https://doi.org/10.34818/eoe.v7i2.12437