Implementasi Pengamanan Pada Jaringan Lorawan Untuk Mengatasi Serangan Sniffing Dengan Menggunakan Metode Digital Signature
DOI:
https://doi.org/10.34818/eoe.v7i2.13079Abstract
Abstrak LoRa atau Long Range dengan teknologi LoRaWAN adalah contoh baru dari kelas jaringan dan sedang digunakan dalam skala besar di beberapa negara. Kekurangan dari jaringan LoRaWAN yaitu tidak adanya proses enkripsi pada payload data. Saat proses pengiriman pesan sedang berjalan antar perangkat, sniffing process dapat mengetahui semua pesan yang dikirim maupun yang diterima oleh perangkat, sehingga besar kemungkinan dapat terjadi serangan dari proses sniffing tersebut yang menyebabkan tidak adanya privasi dalam payload data. Penelitian ini menggunakan metode digital signature untuk mengamankan pesan yang dikirimkan oleh perangkat jaringan LoRaWAN menggunakan algoritma Advanced Encryption Standard (AES) pada proses enkripsi dan dekripsi pesan, serta menggunakan algoritma Ed25519 pada proses signature, penelitian ini juga menganalisis overhead dari penerapan metode digital signature. Tujuan penerapan digital signature dalam sistem ini adalah untuk memverifikasi bahwa payload data yang dikirim adalah asli dan tidak berubah selama proses transmisi, serta menjamin kerahasiaan pada payload data. Penambahan mekanisme keamanan pada jaringan LoRaWAN seperti proses enkripsi, dekripsi dan hasil verifikasi telah menghasilkan overhead pada beberapa aspek. Setelah dilakukan analisis, terdapat peningkatan ukuran untuk beberapa aspek saat diterapkannya metode digital signature. Kata kunci : LoRaWAN, sniffing, digital signature, AES, overhead. Abstract LoRa or Long Range with LoRaWAN technology is a new example of a network class and is being used on a large scale in several countries. The weakness of the LoRaWAN network is that there is no encryption process in the data payload. When the process of sending messages is running between devices, the sniffing process can find out all the messages sent and received by the device, so there is a big possibility that attacks can occur from the sniffing process that causes no privacy in the data payload. This study uses a digital signature method to secure messages sent by LoRaWAN network devices using the Advanced Encryption Standard (AES) algorithm in the message encryption and decryption process, and using the Ed25519 algorithm in the signature process, this study also analyzes the overhead of applying the digital signature method. The purpose of implementing digital signatures in this system is to verify that the data payload sent is original and does not change during the transmission process, as well as guaranteeing the confidentiality of the data payload. The addition of security mechanisms on the LoRaWAN network such as encryption, decryption and verification results has resulted in overhead in several aspects. After the analysis, there was an increase in size for several aspects when the digital signature method was applied. Keywords: LoRaWAN, sniffing, digital signature, AES, overhead
Downloads
References
[1]S. Andy, B. Rahardjo, and B. Hanindhito, “Attack scenarios and security analysis of mqtt communication protocol in iot system,” in International Conference on Electrical Engineering, Computer Science and Informatics (EECSI), 2017.
[2]E. Aras, N. Small, G. S. Ramachandran, S. Delbruel, W. Joosen, and D. Hughes, “Selective jamming of LoRaWAN using commodity hardware,” in ACM International Conference Proceeding Series, 2017.
[3]D. V. Sandi and M. Arrofiq, “Implementasi Analisis NIDS Berbasis Snort Dengan Metode Fuzy Untuk Mengatasi Serangan LoRaWAN,” J. RESTI (Rekayasa Sist. dan Teknol. Informasi), 2018.
[4]A. Fauzi and I. Suartana, “MONITORING JARINGAN WIRELESS TERHADAP SERANGAN PACKET SNIFFING DENGAN MENGGUNAKAN IDS,” J. Manaj. Inform., vol. 8, no. 2, 2018.
[5]R. Dhagat and P. Joshi, “New approach of user authentication using digital signature,” in 2016 Symposium on Colossal Data Analysis and Networking, CDAN 2016, 2016.
[6]M. Ihwani, “MODEL KEAMANAN INFORMASI BERBASIS DIGITAL SIGNATURE DENGAN ALGORITMA RSA,” CESSJournal Comput. Eng. Syst. Sci., 2016.
[7]S. Chandra, S. Paira, S. S. Alam, and G. Sanyal, “A comparative survey of symmetric and asymmetric key cryptography,” in 2014 International Conference on Electronics, Communication and Computational Engineering, ICECCE 2014, 2014.
[8]M. A. Mughal, X. Luo, A. Ullah, S. Ullah, and Z. Mahmood, “A lightweight digital signature based security scheme for human-centered internet of things,” IEEE Access, 2018.
[9]A. Rizzardi, S. Sicari, D. Miorandi, and A. Coen-Porisini, “AUPS: An Open Source AUthenticated Publish/Subscribe system for the Internet of Things,” Inf. Syst., 2016.
[10]H. Hidayat, P. Sukarno, and A. A. Wardana, “Overhead Analysis on the Use of Digital Signature in MQTT Protocol,” in Proceedings of the International Conference on Electrical Engineering and Informatics, 2019.
[11]H. Arijuddin, A. Bhawiyuga, and K. Amron, “Pengembangan Sistem Perantara Pengiriman Data Menggunakan Modul Komunikasi LoRa dan Protokol MQTT Pada Wireless Sensor Network,” Pengemb. Teknol. Inf. dan Ilmu Komput., 2019.
[12]I. Butun, N. Pereira, and M. Gidlund, “Security risk analysis of LoRaWAN and future directions,” Futur. Internet, 2018.
[13]H. Gupta and P. C. Van Oorschot, “Onboarding and Software Update Architecture for IoT Devices,” in
2019 17th International Conference on Privacy, Security and Trust, PST 2019 - Proceedings, 2019.
[14]Z. A. Alizai, N. F. Tareen, and I. Jadoon, “Improved IoT Device Authentication Scheme Using Device Capability and Digital Signatures,” in ICAEM 2018 - 2018 International Conference on Applied and Engineering Mathematics, Proceedings, 2018.
[15]A. Joux, Algorithmic Cryptanalysis. 2009.
[16]Asiyanik, “STUDI TERHADAP ADVANCED ENCRYPTION STANDARD (AES) DANALGORITMA KNAPSACK DALAM PENGAMANAN DATA,” SANTIKA, 2017.
[17]D. Zorbas, K. Abdelfadeel, P. Kotzanikolaou, and D. Pesch, “TS-LoRa: Time-slotted LoRaWAN for the Industrial Internet of Things,” Comput. Commun., 2020.



