Perancangan Kebijakan Persediaan Suku Cadang Kritis Lokomotif Ge C18mmi Menggunakan Metode Continous Review (s,q) Dengan Mempertimbangkan Failure Occurence Untuk Meningkatkan Service Level Di Depo Lokomotif Yogyakarta

Authors

DOI:

https://doi.org/10.34818/eoe.v7i3.14172

Abstract

Abstrak UPT Depo Lokomotif Yogyakarta adalah sebuah tempat perawatan dan perbaikan mesin lokomotif yang merupakan bagian dari unit usaha PT Kereta Api Indonesia (Persero) Daerah Operasi VI Yogyakarta. Semenjak 2018, UPT Depo Lokomotif selalu mengalami keterlambatan dalam proses perbaikan mesin lokomotif GE C18Mmi mengakibatkan lamanya durasi waktu mesin untuk berhenti (downtime), yang mana kejadian ini diakibatkan dari ketidak ketersediaan suku cadang pada ruang persediaan (stock room). Salah satu penyebabnya ialah akibat dari ketidakpastian dari waktu kejadian gangguan untuk kehandalan (Failure Occurence) mesin lokomotif GE C18Mmi dalam melayani operasi perjalan penumpang. Lamanya durasi gangguan kerusakan mesin dapat menyebabkan keterlambatan perjalanan penumpang pada stasiun kereta. Oleh sebab itu, diperlukanlah perancangan kebijakan untuk pasokan suku cadang mesin lokomotif GE C18Mmi menggunakan sistem kebijakan pengendalian persediaan Continous Review (s,Q) dengan distribusi data permintaan diskrit berdistribusi poisson dapat meningkatkan service level sebesar 16.467 % dari kondisi awal. Kata Kunci: Failure Occurence, Permintaan Diskrit , Continous Review (s,Q), Sevice Level Abstract UPT Depo Lokomotif Yogyakarta is a place to carry out maintenace, and minor repair of locomotive engines which is part of PT Kereta Api Indonesia (Persero) Daerah Operasi VI Yogyakarta. During 2018, UPT Depo Lokomotif Yogyakarta always experienced delays in the downtime of of the GE C18Mmi locomotive engine repair due unavailability of parts in the stockroom. One of the cause is the uncertainty of Failure Occurence for realibility GE C18Mmi locomotive engine from passenger travel services operations. The downtime can hinder the arrival time of passengers at the railway station. Therefore, it is necessary to design of policy to supply GE C18Mmi locomotive engine parts, especially critical parts to determine the optimum service level, Re-order point, and order quantity. Thust the stockout problem due to uncertainty in failure occurence can be minimized so that it can be increase cummulative service level. This study a critical parts, part of GE C18Mmi locomotive engine parts, stock control policy using the Continous Review (s,Q) method with poisson distribution in modeling discreate demand can increase the service level by 16.467 % from eksisting condition. Keyword: Continous Review (s,Q), Failure Occurence, Locomotive GE C18MMi, Sevice Level, Suku Cadang Kritis

Downloads

Download data is not yet available.

References

[1]Bahagia, S.N. (2006). Sistem Inventori. Bandung: ITB.

[2]Marni, A., Ridwan, A.Y., Juliani, W. (2016).Penentuan Kebijakan Persediaan Spare Part di Dipo Bandung PT. Kereta Api Indonesia dengan Pendekatan Continous Review System (s,S) untuk Menentukan Penghematan Total Biaya Persediaan. e-Proceeding of Engineering: Vol.3, No.2 Agusutsl 2016 p.2450

[3]Louit, D., Pascual, R., Banjevic, D., & Jardine, A. (2011). Optimization Model for Critical Spare Parts Inventories-a reliability approach. Journal of the Operational Research Society, 992-1004

[4]Mladen. (2010). Multicriteria Inventory Model For Spare Parts. Technical Gazzete, 499-504

[5]Wongmongkolrit, S., & Rassameethes, B. (2011). The Determination of High Cost and Low Cost Spare Parts by Using the Comparison between EOQ Model and Lot-for-Lot Inventory Model : A Case Study of Slow Moving Item. IInstitute of Electrical and Electronics Engineers, 6-11

[6]Silver. A,E. (1998). Inventory Management and Production Planning and Schedulling. John Willey & Sons. New York.

[7]Tersine, Richard J.(1994). Principles of Inventory and Material Management. United States of America :

Prentice Hall

[8]Waters, Donald. (2003). Inventory Control and Management. Great Britain : Wiley

[9]Zappone, Jaime. (2016). Inventory Theory. Journal of Knowledge Management.

[10]Sakon Wongmongkolrit, B. R. (2016). The Classification of Criticality for Spare Parts by Applying the Ratio of Production Lost Cost to Spare Parts Inventory Cost. British Journal of Applied Science & Technology, 1-9.

[11]Emas, K. P. (2020, January 30). Menghitung Bea Masuk dan Pajak dalam Rangka Impor. Retrieved from IMPOR BARANG KIRIMAN: http://bctemas.beacukai.go.id/faq/impor-barang-kiriman/

[12]Muttaqin, P. S., Damayanti, D. D., & Kamil, A. A. (2018). INTEGRATED MODEL DEVELOPMENT OF SPARE PART INVENTORY AND MAINTENANCE. Atlantis Highlights in Engineering (AHE), volme 2 International Confrence on Industrial Enterprise and System Engineering (IcoIESE 2018), 364-368.

[13]Ben-Daya, M., Duffuaa, S. O., Raouf, A., Knezevic, J., & Ait-Kadi, D. (2009). Handbook of Maintenance Management and Engineering. Saudi Arabia: Springer.

[14]Louit, D., Pascual, R., Banjevic, D., & Jardine, A. (2011). Optimization Model for Critical Spare Parts Inventories-a realibility approach. Journal of the Operational Research Society, 992-1004

[15]KAI, P. (2019). Pantauaan Depo Lok Yogyakarta. Yogyakarta: Unit Pelaksana Teknis Depo Lokomotif Yogyakarta.

[16]Beling, C. E. (2003). An Introduction to Realiability and Maintainability Engineering. New York, San Fransisco: MCGraw-Hill.

[17]Conceicao, S. V., Caetano, G. L., DaweiLu, Nunes, N. T., & Pedrosa, G. C. (2015). A Demand Classification Scheme for Spare Part Inventory Model Subject to Stochastic Demand and Lead Time. Production Planning & Control , 1-14.

[18]Vrat, P. (2014). Materials Management. In P. Vrat, Material Management An Integrated System (pp. 25-26). New York: Springer.

[19]Gannon, J. P. (2018). Applying System Thinking to Engineering and Design. MDPI, 10.

[20]EKE-Electronics. (2018, February 23). Safety Integrated Level (SIL) function for railway application. Retrieved from EKE-Electronics: www.eke-electronics.com

[21]Wongmongkolrit, S., & Rassamethes, B. (2011). The Modification of EOQ Model under the Spare Parts Discrete Demand: A Case Study of Slow Moving Items. San Francisco: World Congress on Engineering and Computer Science

[22]Musdalifa, A. (2013). ESTIMASI PENENTUAN PARAMETER DISTRIBUSI WEIBULL DENGAN TRANSFORMASI MODEL REGRESI MENGGUNAKAN METODE KUADRAT TERKECIL LINIER. Makasar: Jurusan Matematika UNHASS.

[23]Arindya, R. (2014). Instrumentasi dan Kontrol Proses. Tanggerang Selatan: Graha Ilmu.

Downloads

Published

2020-12-01

Issue

Pages

9516-9525

Section

Program Studi S1 Teknik Industri

How to Cite

Wicaksono, W. R., Ridwan, A. Y., & Santosa, B. (2020). Perancangan Kebijakan Persediaan Suku Cadang Kritis Lokomotif Ge C18mmi Menggunakan Metode Continous Review (s,q) Dengan Mempertimbangkan Failure Occurence Untuk Meningkatkan Service Level Di Depo Lokomotif Yogyakarta. EProceedings of Engineering, 7(3), 9516-9525. https://doi.org/10.34818/eoe.v7i3.14172