Perancangan Dan Analisis Jaringan Fiber To The Home Stroomnet Di Bandar Lampung

Authors

DOI:

https://doi.org/10.34818/eoe.v8i6.17168

Abstract

Abstrak Jaringan akses internet kini sudah beralih dari kabel tembaga ke serat optik, hal ini disebabkan serat optik memiliki layanan yang lebih baik dan pembangunan distribusi jaringan serat optik ke rumah-rumah lebih efisien, yang lebih dikenal dengan nama FTHH yang menggunakan teknologi GPON. Dalam Tugas Akhir ini dipilih beberapa cluster perumahan yang ada di Bandar Lampung untuk perencanaan dan analisis jaringan FTTH. Metode yang dipilih pada penelitian ini adalah: survey, perancangan, simulasi, dan analisis. Kemudian penelitian hasil dengan analisis power link budget, rise time budget, dan bit error rate. Analisis ini menggunakan Optiwave Optisystem untuk mendapatkan perhitungan, dan Mapping cluster perumahan yang ada di Bandar Lampung menggunakan Google Earth dan menggunakan perangkat yaitu OLT,FDT,FAT dan ONT. Hasil Perhitungan link power budget, total redaman yang dihasilkan mendapatkan nilai daya terima -17,28. Untuk nilai rise time budget mendapatkan nilai waktu batasan 2,8×10^(-10) untuk pengkodean NRZ. Dari hasil perhitungan tersebut didapatkan 2,5171×10^(-10). Hasil RTB bernilai baik karena tsystem yang lebih kecil dari batasan waktu tiap pengkodean NRZ. Untuk bit error rate nilai yang dihasilkan dari simulasi 1,15146 x 10^(-22). Nilai BER pada rancangan tersebut memenuhi standar nilai minimum BER yang ditetapkan untuk optik, yaitu sebesar 1 x 10^(- 9). Nilai tersebut memenuhi standar ITU-T G.984. Kata Kunci: FTTH, Link budget, BER, Rise time budget, GPON, Stroomnet, Bandar Lampung, ICON+. Abstract The internet access network has now switched from copper cables to fiber optic, this is due to fiber optic having better services and the construction of a more efficient distribution of fiber optic networks to home, which is better known as FTHH which uses GPON technology. In this final project selected several housing cluster in Bandar Lampung for FTTH network planning and analysis. The methods chosen in this research are: survey, design, simulation, and analysis. Then research the results by analyzing the power link budget, rise time budget, and bit error rate. This analysis uses Optiwave Optisystem to get calculations, and Mapping housing clusters in Bandar Lampung using Google Earth and using OLT, FDT, FAT and ONT tools. The results calculation of the link power budget, the total attenuation produced gets an acceptability value of -17.28. For the rise time budget value, the time limit value is 2.8×10^-10 for NRZ. From the result of these calculation obtained 2,5171×10^-10. For the bit error rate the value generated from the simulation is 1.15146 x 10^-22. The BER value in the is 1 x 10^-9. All of these values meet the eligibility of ITU-T G.984. Keywords: FTTH, Link budget, BER, Rise time budget, GPON, Stroomnet, Bandar Lampung, ICON+.

References

[1] ICON+, “Tentang Kami.” http://www.iconpln.co.id/about/.

[2] G. Wibisono, Sistem Jaringan Fiber Optic. Bandung: INFORMATIKA, 2020.

[3] A. J. Maulana, “PERENCANAAN DESAIN JARINGAN METRO FTTH DI UNIVERSITAS

INDONESIA,” Universitas Indonesia, 2012.

[4] R. P. S. Gandaatmaja, “ANALISIS SIMULASI PERFORMANSI MODULASI DIRECT DAN

EKSTERNAL PADA JARINGAN FTTH DENGAN GIGABIT PASSIVE OPTICAL NETWORK

(GPON),” 2014.

[5] Gerd Keiser, Optical Fiber Communications. Singapore: Mc Graw Hill, 2000.

[6] Widyantoro Tejo Mukti, “Perancangan Jaringan Fiber To The Home (FTTH) Link STO Arengka ke

Perumahan Villa Melati Permai II,” 2017.

[7] D. Fourman, “Perancangan Dan Analisis Jaringan Akses Fiber To The Home (FTTH) Dengan Teknologi

Gigabit Passive Optical Network (GPON) di Perumahan Grand Sharon,” Telkom University, 2019.

[8] Google, “Persyaratan Sistem,” Konfigurasi sistem windows.

https://support.google.com/earth/answer/21955?hl=id (accessed Nov. 21, 2020).

[9] Optiwave, “Minimum System Requirements,” 2020. https://optiwave.com/resources/systemrequirements/minimum-and-recommended/ (accessed Dec. 07, 2020).

[10] ZTE Corporation, “ZXA10 C300: Optical Access Covergence Equipment – Product Description,” 2020.

[11] ITU-T Recommendation G.652, “Characteristics of a single mode optical fibre and cable,” 2020.

[12] A. Electronic, “Calculating Fiber Loss and Distance Estimates,” 2020.

[13] Raisecom, “Raisecom PON Product,” 2020.

[14] O. N. T. Yuwana, “Perancangan Jaringan Fiber To the Home ( FTTH ) dengan Teknologi GPON di

Kecamatan Cibeber Kota Cilegon,” Universitas Islam Indonesia, 2017.

[15] International Telecommunication Union, “ITU-T G.984,” 2008.

Downloads

Published

2021-12-01

Issue

Pages

11682-11688

Section

Program Studi S1 Teknik Telekomunikasi