Pengembangan Alat Pemisah Kulit Ari Kedelai Menggunakan Metode Reverse Engineering
DOI:
https://doi.org/10.34818/eoe.v7i3.14168Abstrak
Abstrak Tempe adalah salah satu makanan tradisional khas Indonesia. Sebelum tempe siap di pasarkan, biji kacang kedelai mentah harus melewati alur produksi yang dibagi kedalam 2 tahap, yaitu tahap basah yang menggunakan air dalam prosesnya, dan tahap kering yang tidak menggunakan air. Menurut hasil wawancara dengan kepala produksi pada perusahaan tempe CV. Mitra Pangan Sejahtera, umur dan kualitas tempe sangat bergantung dari proses persiapan tempe, salah satu faktor utama yang mempengaruhi umur dan kualitas tempe adalah pada proses pemisahan kulit ari, tempe akan mudah busuk dan berkualitas rendah apabila sebelum proses penjamuran kulit ari masih tersisa. Pada penelitian sebelumnya oleh Mohammad Yasin Abdul Hafiidh(2019) telah dibuat mesin untuk memisahkan kulit ari kacang kedelai, dari data yang di dapatkan, produktifitas mesin tersebut sebesar 52,78%, sedangkan pada penelitian yang dilakukan oleh (Wisnujati, 2016), tingkat produktifitas optimal mesin pengupas kulit ari sebesar 82%. Penelitian ini bertujuan untuk meningkatkan produktifitas mesin pemisah kulit ari kacang kedelai yang diggunakan pada proses produksi tempe CV. Mitra Pangan Sejahtera. Setelah di lakukan uji coba pada prototype mesin pemisah kulit ari kacang kedelai dengan menggunakan 4 jenis blade pemisah kulit ari dengan 2 variabel kecepatan putar 20 rpm dan 30 rpm, didapatkan hasil terbaik yaitu blade straight dengan kecepatan putar 20 rpm karena memiliki rata rata tingkat produktifitas 90%. Kata kunci : Kulit Ari Kacang Kedelai, Mesin Pemisah Kulit Ari, Reverse Engineering, Gearbox, Kebersihan Abstract Tempe is a one of traditional Indonesian food. Before tempe is ready to be marketed, raw soybean seeds must pass through the production which is divided into 2 steps, the first one is wet stage that uses water in the process, and the second is dry stage that does not use water. According to interviews with the head of production at CV. Mitra Pangan Sejahtera (tempe company), age and quality of tempe depend on the preparation process of tempeh, one of the main factors affecting the age and quality of tempe is in the process of separating the hull, the tempeh will rot easily and have a low quality if there is remaining hull in the fermentation process in previous studies by Mohammad Yasin Abdul Hafiidh (2019) a machine was made to separate the soybean hull , from the data obtained, the productivity of the machine was 52.78%, while in research conducted by (Wisnujati, 2016), optimal productivity of soy bean hull separator machine is 82%. This study aims to increase the productivity of the soybean hull separator used in the tempe production process of CV. Mitra Pangan Sejahtera. After testing the prototype of a soy bean hull separator using 4 types of hull separating blades with 2 variable rotating speeds of 20 rpm and 30 rpm, the best results were obtained, namely a straight blade with a rotating speed of 20 rpm because it had an average level of productivity by 90%. Keywords: Soybean Hull, Soybean Hull Separator, Reverse Engineering, Gearbox, cleanlinessUnduhan
Referensi
Abdulhakim, F., Kusnayat, A., & Martini, S. (2018). PERANCANGAN WADAH PEMISAH KULIT ARI KEDELAI MENGGUNAKAN METODE REVERSE ENGINEERING GUNA MENGURANGI WAKTU SIKLUS. 5(3), 6973–6980.
Al-Hadid, N., Kusnayat, A., & Rahayu, M. (2017). Perancangan Ulang Bak Penampung Bahan Baku Pakan Ternak Menggunak an Metode Reverse Engineering Untuk Mengurangi Risiko Kecelakaan Kerja Redesign. E-Proceeding of Engineering, 4(23), 2720–2730. https://doi.org/10.15797/concom.2019..23.009
Azeke, M. A., Fretzdorff, B., Buening-Pfaue, H., & Betsche, T. (2007). Comparative effect of boiling and solid substrate fermentation using the tempeh fungus (Rhizopus oligosporus) on the flatulence potential of African yambean (Sphenostylis stenocarpa L.) seeds. Food Chemistry, 103(4), 1420–1425. https://doi.org/10.1016/j.foodchem.2006.10.058
Badan Standarisasi Nasional. (2012). Tempe : Persembahan Indonesia untuk Dunia. GSP 297, 12–22. https://doi.org/10.1061/9780784481608.002
Björkman, M. (1992). What is productivity? IFAC Proceedings Volumes, 25(8), 203–210. https://doi.org/10.1016/S1474-6670(17)54065-3
Dúbravčík, M., & Kender, Š. (2012). Application of reverse engineering techniques in mechanics system services. Procedia Engineering, 48, 96–104. https://doi.org/10.1016/j.proeng.2012.09.491
Firdaus, N., Panjaitan, U., & Prasetyo, B. T. (2016). Rekayasa Ulang Komponen Mekanis Sistem Turbin Air. 6(2), 72–79. https://doi.org/10.21063/JTM.2016.V6.72-79
Friesinger, G., & Herwig, J. (2014). The Art of Reverse Engineering: Open - Dissect - Rebuild. transcript Verlag. https://books.google.co.id/books?id=8Y-TBQAAQBAJ&printsec=frontcover#v=onepage&q=reverse engineering&f=false
Gameros, A., De Chiffre, L., Siller, H. R., Hiller, J., & Genta, G. (2015). A reverse engineering methodology for nickel alloy turbine blades with internal features. CIRP Journal of Manufacturing Science and Technology, 9, 116–124. https://doi.org/10.1016/j.cirpj.2014.12.001
Giesecke, F. E., Mitchell, A., Spencer, H. C., Hill, L. I., Dygdon, J. T., & Novak, J. E. (2000). Gambar Teknik (11th ed.). ERLANGGA.
Hafiidh, M. Y. A., Kusnayat, A., & Febriyanti, E. (2019). PERANCANGAN MESIN PENGADUK UNTUK MEMISAH KULIT ARI KEDELAI MENGGUNAKAN METODE REVERSE ENGINEERING. 6(2), 6743–6749.
Innocentini, M. D. M., Barizan, W. S., Alves, M. N. O., & Jr, R. P. (2009). Pneumatic separation of hulls and meats from cracked soybeans. Food and Bioproducts Processing, 87(4), 237–246. https://doi.org/10.1016/j.fbp.2008.11.001
Khumaedi, M., Sudarman, S., Widjanarko, D., & Sukoco, I. (2019). Pembuatan Mesin Pengelupas Kedelai Untuk Meningkatkan Produksi. Rekayasa, 16(2), 141–148. https://doi.org/10.15294/rekayasa.v16i2.17503
Kraft, C. (2012). Identifying User Needs. User Experience Innovation, 27–42. https://doi.org/10.1007/978-1-4302-4150-8_4
Kurniawati, S., Lestiani, D. D., Damastuti, E., & Santoso, M. (2019). The selenium content of Tempeh in Indonesia and its potential contribution to the dietary selenium requirements for adults. Journal of Food Composition and Analysis, 82(January), 103222. https://doi.org/10.1016/j.jfca.2019.05.005
Liang, X., Zuo, M. J., & Feng, Z. (2018). Dynamic modeling of gearbox faults: A review. Mechanical Systems and Signal Processing, 98, 852–876. https://doi.org/10.1016/j.ymssp.2017.05.024
Macaulay, L. (1995). Cooperation in understanding user needs and requirements. Computer Integrated Manufacturing Systems, 8(2), 155–165. https://doi.org/10.1016/0951-5240(95)00010-Q
Matta, A. K., Ranga Raju, D., & Suman, K. N. S. (2015). The Integration of CAD/CAM and Rapid Prototyping in Product Development: A Review. Materials Today: Proceedings, 2(4–5), 3438–3445. https://doi.org/10.1016/j.matpr.2015.07.319
Melka, B., Smolka, J., Hetmanczyk, J., & Lasek, P. (2019). Numerical and experimental analysis of heat dissipation intensification from electric motor. Energy, 182, 269–279. https://doi.org/10.1016/j.energy.2019.06.023
Montgomery, R., & McDowall, R. (2008). Basics of Electricity. Fundamentals of HVAC Control Systems, 30–60. https://doi.org/10.1016/b978-0-08-055233-0.00002-9
Mott, R. L. (2004). Machine Elements in Mechnical Design (4th ed.). Pearson.
Noorani, R. (2006). Rapid Prototyping. Wiley.
Oka, G. P. A. (2017). Model Konseptual Pengembangan Produk Pembelajaran: Disertai Teknik Evaluasi (1st ed.). DEEPUBLISH. https://books.google.co.id/books?id=tHrbDgAAQBAJ&printsec=frontcover&dq=inauthor:%22Gde+Putu+Arya+Oka,+M.Pd%22&hl=en&sa=X&ved=2ahUKEwiA6ZXP3P7qAhVRVH0KHV35A38Q6wEwAXoECAAQAQ#v=onepage&q&f=false
Otto, K. N., & Wood, K. L. (1996). A reverse engineering and redesign methodology for product evolution. Proceedings of the ASME Design Engineering Technical Conferences and Design Theory and Methodology Conference (DETC’96), 1–15.
Shabrina, E., Kusnayat, A., & Martini, S. (2018). PERANCANGAN AGITATOR MESIN PEMISAH KULIT ARI KEDELAI GUNA MENGURANGI WAKTU SIKLUS MENGGUNAKAN PENDEKATAN REVERSE ENGINEERING. 5(3), 6766–6773.
Shastri, A. P., & Borkar, P. N. B. (2015). A Review on Nomenclature of Agitator. 1, 435–439.
Shurtleff, W., & Aoyagi, A. (1979). The Book of Tempeh (2nd ed.). Ten Speed Press.
Tang, D., Zhu, R., & Xu, R. (2010). Functional reverse design: Method and application. Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010, 50775111, 723–727. https://doi.org/10.1109/CSCWD.2010.5471882
Tjandra, S., Fang, K., & Suteja, T. (2012). Perancangan Ulang Mesin Stuffing Ribbon Pada Pt. Xyz Dengan Metode Reverse Engineering. Jurnal IPTEK - Media Komunikasi Teknologi, 16(1), 40–54.
Wisnujati, A. (2016). Penerapan Ilmu Pengetahuan Dan Teknologi Mesin Pengupas Kulit Ari Kedelai Jenis Screw Pada Industri Kecil Tempe. Teknoin, 22(1). https://doi.org/10.20885/teknoin.vol22.iss1.art2



